ToolSlash LogoToolSlash
Tools →

Resistance Calculator

Guide

Electrical Resistance & Circuit Analysis

Electrical resistance measures the opposition an electrical conductor presents to the flow of electric current. In linear resistive circuits, resistance ($R$), potential difference ($V$), and current ($I$) obey Ohm's Law: V = I · R.

Ohm's Law & Power Dissipation Formulas

  • Resistance: R = V / I (expressed in Ohms, $\Omega$)
  • Electric Current: I = V / R (expressed in Amperes, $\text{A}$)
  • Potential Voltage: V = I · R (expressed in Volts, $\text{V}$)
  • Joule's Power Dissipation: P = V · I = I² · R = V² / R (expressed in Watts, $\text{W}$)

Series vs. Parallel Resistance Networks

When connecting multiple resistors within an electronic circuit, the equivalent resistance varies according to network topology:

  • Series Network: Resistors share the same current, adding resistances directly: R_total = R₁ + R₂ + ... + R_n.
  • Parallel Network: Resistors share the identical voltage across branches, reducing total equivalent resistance below any individual branch: 1 / R_total = (1 / R₁) + (1 / R₂), or for two resistors: R_total = (R₁ · R₂) / (R₁ + R₂).

Resistor Power Rating & Thermal Safety

Excess electrical energy in a resistor is converted directly into thermal heat. To prevent thermal breakdown or component smoking, always select a physical resistor with a power rating at least 1.5× to 2× the calculated dissipation. Standard commercial through-hole wattage ratings include 1/8W (0.125W), 1/4W (0.25W), 1/2W (0.5W), 1W, and 5W wirewound power resistors.